C++ engineer on embedded Linux with an audio pedigree: a software audio mixer for priority-scaled SCADA alert audio at HP, when mixing was done entirely in software; years of building Linux kernels through the 2.4/2.6 days for advanced driver support; and real-time signal processing at rates that make audio look leisurely — a 25 Msps SDR receiver decoding 64 concurrent channels on commodity ARM hardware. Networking and IPC at scale, signed release delivery, CI/CD, and a garage robotics project with a firmware layer of its own. (PDF, Text)
Skills
- C/C++ & real-time: C++ (25+ yrs), C, Python (15+ yrs), Rust (5+ yrs), Go (working fluency); SIMD (Intel AVX, ARM NEON); lock-free concurrency; multi-threaded and multi-process designs with hard latency budgets.
- Embedded Linux: kernel building through the 2.4/2.6 years for advanced driver support; device drivers; cross-compilation — ARMv8 with hand-optimized NEON hot paths, C++ to WebAssembly via Emscripten; hardware bring-up, PCB debug, serial protocols, microcontrollers (ESP32, AVR-class).
- Audio & DSP: software audio mixer for priority-scaled SCADA alert audio (HP) — all-software mixing before hardware offload was the norm; polyphase filterbanks, window/DFT design, sub-sample timing estimation; real-time pipelines sustained at multi-Msps — audio rates are the leisurely end.
- Networking & services: TCP/IP, UDP, HTTP(S), TLS 1.3/mTLS, QUIC, WebSockets; custom datagram protocols (JPEG frames + IMU samples over UDP); service discovery; Unix sockets, messaging systems, architectures of hundreds of concurrent processes.
- Build, CI & delivery: Git, CI/CD (GitHub and GitLab pipelines), Docker build images, Nix reproducible builds, Make-based cross-compilation toolchains, signed release delivery (Ed25519).
- Diagnostics: Linux system-level debugging across processes, networking, memory and performance; regression harnesses measured against recorded field data; the 2 AM stack trace.
Experience
IT/OT Solutions Engineer - Vantage Engineering (Spruce Grove, AB 2026–present)
- Built Ignition SCADA CI/CD: pre-deployment testing of Ignition Python scripts against CPython 2.7, Jython and Ignition's own Jython over an offline runtime simulation; Git-managed deployments, dev/staging/production environments with automated regression testing.
- Developed a secure DNP3 data diode supplying real-time field data to IT systems while leaving OT field equipment unreachable from the IT side.
R&D Consultant - Dominion R&D Corp. (Remote, 2009–present)
- Built and operate
BUCKy, a production local-LLM service (llama.cpp) grounding a ~100K-token knowledge base: precomputed once into a KV cache and cloned copy-on-write per session, ~10x per-query cost reduction, running on commodity Mac hardware. - Deployed and operate a fleet of hundreds of remotely monitored Starlink-connected routers across remote sites: indoor/outdoor WiFi, camera monitoring, and on-site PCs running AI image analysis (Blue Iris) that triggers event reporting and annotates video segments.
- Developed
ezpwd-reed-solomon, high-throughput C++ error-control codecs with SIMD inner loops, cross-compiled to JavaScript/WebAssembly via Emscripten; used by aerospace and defence developers globally. - Created
cpppo, the Python EtherNet/IP and CIP protocol library used worldwide as the integration layer between analytics and the PLCs on the plant floor. - Built
datasim, a large-scale PLC simulation environment — hundreds of concurrent simulated PLCs, each its own process and network stack — with field-data replay and latency, loss and bandwidth injection. - Designed, fabbed and bench-tested a prototype 1-Wire sensor board for intrinsically safe grain-bin monitoring; the pilot did not proceed.
Software Engineer - clearGRID Ltd. (Kelowna, BC 2017–2022)
- Built an end-to-end real-time receiver that polyphase-filterbank-channelized a 25 Msps I/Q stream into 200 kHz channels — 125 in the full band, 65 in the production band — decoding SCM reports on 64 concurrent 900 MHz ISM-band channels, sustained, with no dropped samples, on commodity x86 and ARMv8.
- Built a recorded-signal regression harness so algorithm changes were measured against captured field data rather than synthetic benchmarks.
Distributed Systems R&D - Holo Ltd. (Kelowna, BC 2018–2020)
- Architected and validated HoloFuel's partition-tolerant transaction engine in Rust: agents advance shared state whenever they can communicate, with no total-order or quorum lockup.
Sr. IT Advisor - Enbridge Pipelines (Edmonton, AB 2002–2009)
- Developed solid-state RTU firmware for continuous 24/7 control in remote locations, sustaining fewer than 1 defect per 10,000 lines of code, measured in the field.
- Architected LiveWIRE, a cryptographically secure, Reed-Solomon erasure-coded, multi-route protocol for real-time SCADA telemetry over marginal and intermittent links.
Software Developer - Hewlett-Packard (Calgary, AB 1989–1996)
- Developed the software audio mixer for RTAP's priority-scaled SCADA alert audio — audio mixing done entirely in software, in an era when the hardware did it; shipped in the platform still deployed continent-wide, 30+ years on.
- Re-engineered the core alarm engine of the RTAP SCADA platform around DFA state machines; end-users configure complex, distributed safety-critical workflows.
Personal Projects
BB-8 Droid - with my daughter (2026)
- Working on converting a Disney Droid Depot BB-8 into an autonomous, AI-driven robot: an ESP32-S3 camera head streaming MJPEG over a custom UDP protocol (each datagram carries one JPEG frame and its accumulated IMU samples, atomic by design), BLE motor control, monocular visual odometry, GyroFlow stabilization (nobody's done this with a real-time video feed apparently!), and a local LLM model under llama-cpp answering natural-language commands on a commodity Mac. Work in progress (I think perhaps I'm more excited about this project than my girl ;)
Open Source
- cpppo - Industrial EtherNet/IP, CIP and Modbus protocol implementation (Python)
- ezpwd-reed-solomon - Reed-Solomon and BCH FEC (C++/JS/Python)